details

following are images describing the details and assemble of the NOTEBLOX

please scroll down to view all images

components are as follows...

  1. OUTER COVER
    1. FRONT COVER
      1. 1.5mm KRAFT BOARD
      2. 5mm x 25mm x 1.5mm NEODYMIUM magnets (qty=2)
      3. 5mm x 12.5mm x 1.5mm NEODYMIUM magnets (qty=4)
      4. CLICK TO SEE MAGNET SPECIFICATIONS
      5. imprinted with 1 color LOGO (see "about")
    2. SPINE
      1. .75mm KRAFT BOARD
    3. BACK COVER MAGNET HOLDER
      1. 1.5mm KRAFT BOARD
      2. 5mm x 25mm x 1.5mm NEODYMIUM magnets (qty=2)
      3. 5mm x 12.5mm x 1.5mm NEODYMIUM magnets (qty=4)
      4. CLICK TO SEE MAGNET SPECIFICATIONS
    4. BACK COVER
      1. .75mm KRAFT BOARD
      2. imprinted with 1 color LOGO (see "about")
    5. BINDING TAPE
      1. cloth binding tape
    6. BACK POCKET
      1. kraft paper
  2. INNER PAPER PAD
    1. 100 sheets
      1. recycled
      2. lined, or grids, or blank
      3. imprinted with 1 color custom graphics (lined + grid + blank) (see "about")
    2. outer pad cover
      1. recycled
      2. cover weight
      3. imprinted with 1 color logo (see "about")



CAD DRAWINGS follow, illustrating the the assembly, but with physical dimensions
(CLICK TO ENLARGE ALL DRAWINGS BELOW)


image below shows details of the binding in full closed position


image below shows NOTEBLOX with back cover expanded, and stylus magnetically attached to front cover


image below shows 2 NOTEBLOX stacked together


image below shows binding in 100% open position (360 degrees) and iPad attached to magnets in the back cover


image below shows dimensions for all parts


image below shows details of BACK COVER MAGNET HOLDER, position and polarity of magnets is critical


imahge below illustrates the required dimensions of the back pocket


image below shows NOTEBLOX full closed with iPad attached to back binding and elastic straps in place


image below shows detail of the NOTEBLOX binding
top image is 50% open position, as it would sit flat on a table with paper pad attached
bottom image shows dimensional details of cover assembly without the paper pad attached.



image below shows axonometric view of cover assembly, shows internal components

image below shows axonometric view of cover assembly, concealing internal components

image below shows axonometric sketch of NOTEBLOX with paper pad and back pocket attached


image below shows all of the components of the NOTEBLOX



image below shows 3 NOTEBLOX stacked together, magnets hold books together


image below shows binding 100% closed (green = binding tape, yellow = KRAFT BOARD)



photo below shows back binding extended to accept the apple iPad




image below shows binding (green) 100% open with iPad attached



image below shows binding (green) 100% open with iPad attached


image below shows only the front cover (as viewed from inside)



image below shows only the back cover assembly (as viewed from inside)







Comments